Looking to create a cute, custom project for your furry friend? This tutorial is a simple, creative project that you can do at home with just a few simple tools.
Tools Required:
• Cordless Drill
• Chop Saw (Hand Saw is Also Possible)
• 1/4" Drill Bit
• Phillips Screw Bit
• Router (Can Also Use a Jigsaw to Make Holes)
• Butane Torch
• Spray Lacquer or Poly
Materials Required:
• 1" x 10" x 30" Board
• 1-1/4" Wood Screw (x4)
Instructions:
•Cut (1) 18" top, and (2) 6" legs from the 30" Board
•Router out (2) 5-1/2" holes in the 18" top for the dishes
•These holes are centered at 4" x 4-1/2" & 14" x 4-/2"
•Drill (4) holes in the top board
○The holes are 3/4" x 3/8" from each corner
•Using your butane torch, and bone stencil, burn a bone on the center of the top board
•Using the 1-1/2" text stencils, burn the pet's name under the bone on the top board. Use the screwdriver to help hold the stencil in place, to prevent it from moving, and also the torch blowing flames underneath the stencil itself
•Burn paw prints on each 6" leg
•Screw the top board to the legs
•Spray finish the project to protect the burned images from smearing, and let it dry overnight
